|
AVAILABLE MODELS |
| Model |
Cu Ft |
Lube |
Diameter |
U-Width |
Total Height |
Deck Height |
Motor HP |
| NTG-300 |
1.5 |
Grease |
30 |
7.0 |
39 |
32 |
1.0 |
| NTG-2003 |
3.1 |
Grease |
37 |
10.0 |
41 |
37 |
1.5 |
| NTG-3614-B |
3.1 |
Grease |
37 |
10.0 |
35 |
31 |
2.0 |
| NTG-4822 |
6.0 |
Grease |
49 |
11.5 |
40 |
34 |
5.0 |
| NT-4822 |
6.0 |
Oil |
49 |
11.5 |
40 |
34 |
5.0 |
| NTG-5524 |
10.0 |
Grease |
56 |
13.5 |
44 |
37 |
7.5 |
| NT-5524 |
10.0 |
Oil |
56 |
13.5 |
44 |
37 |
7.5 |
| NT-6026 |
12.0 |
Oil |
61 |
14.5 |
45 |
38 |
10.0 |
| NT-7230 |
22.0 |
Oil |
73 |
19.5 |
48 |
41 |
15.0 |
| NT-9048 |
38.0 |
Oil |
91 |
19.5 |
53 |
46 |
20.0 |
| NT-9060 |
20.0 |
Oil |
91 |
13.5 |
48 |
39 |
15.0 |
|
All dimensions are in inches
|
| Construction Details |
The Torex® Internal Separation Bowl has a
wide, U-shaped process channel of heavy steel construction with a
urethane lining. It is mounted on a rigid, round base and suspended
with heavy-duty springs. Separation of parts and media are
accomplished with the internal separation system built into the
processing chamber, and is controlled by a manual lever or pneumatic
cylinder.
ALL WELDED CONSTRUCTION: The processing chamber is an
interlocking steel weldment. Center tube, bowl bottom, internal cone
style gussets, and outer wrap materials are heavy-duty steel plate.
The machine base is round with an upper spring mounting ring and a
lower mounting ring for the three heavy steel feet.
URETHANE LINING: The processing bowl is fully lined with 1"
minimum thickness 88 durometer, poured, not sprayed, polyurethane in
all wear areas of the machine. The standard lining has a ribbed
straight outer wall.
CARTRIDGE DRIVE SYSTEM: The drive shaft and bearings are
mounted in a one piece, solid steel tube with bearing retainers at
each end. Oil seals are shaft mounted to eliminate wearing grooves
in the shaft. The cartridge is mounted in the processing tub using
a tapered socket and wedge bolts. It can easily be removed using
normal maintenance tools. No tools are needed for adjustment on
standard weight systems.
LUBRICATION SYSTEM: A low-pressure oil pump is provided
which provides lubrication to the main shaft bearings. A dual
pressure switch system monitors the oil pump. Note: smaller
machines use grease lubrication.
|
|
tumbling media,tumbling compounds, finishing compounds, plastic deburring media, corn cob media ,vibratory compounds
walnut shell media, deburring media, mass finishing, vibratory finishing machines ,deburring machines, ceramic media, tumbling barrels, centrifugal barrel machines
plastic media, plastic polishing media, metal finishing equipment, mechanical finishing, finishing equipment
2009 Grav Co LLC
