|
AVAILABLE MODELS |
| Model |
Cu Ft |
Lube |
Diameter |
U-Width |
Total Height |
Deck Height |
Motor HP |
| NTG-3614-D |
4 |
Grease |
37 |
11 |
35 |
31 |
1.5 |
| NTG-4822-D |
7 |
Grease |
49 |
13 |
40 |
34 |
5.0 |
| NT-4822-D |
7 |
Oil |
49 |
13 |
40 |
34 |
5.0 |
| NT-6026-D |
14 |
Oil |
61 |
17 |
45 |
38 |
7.5 |
| NT-7230-D |
28 |
Oil |
73 |
21 |
48 |
41 |
10.0 |
|
All dimensions are in inches
|
| Construction Details |
The Torex® Conduction Heated Cob Meal Dryer has a
wide U-shaped process channel of heavy steel construction.
It is mounted on a rigid, round base and suspended
with heavy-duty springs. Separation of parts and media are accomplished
with the internal separation system built into the processing chamber.
ALL WELDED CONSTRUCTION: The processing chamber is an
interlocking steel weldment. Center tube, bowl bottom, internal cone
style gussets, and outer wrap materials are heavy-duty steel plate.
The machine base is round with an upper spring mounting ring and a
lower mounting ring for the three heavy steel feet. These feet extend
outside the main circumference of the base.
CONDUCTION HEATING SYSTEM: Produces constant and even heat. No
possibility of fire or burns to the operator. No hot spots from ceramic
heaters, no extreme localized heat requiring a cool down after the
process is finished.
CARTRIDGE DRIVE SYSTEM: The drive shaft and bearings are mounted
in a one piece, solid steel tube with bearing retainers at each end.
Oil seals are shaft mounted to eliminate wearing grooves in the shaft.
The cartridge is mounted in the processing tub using a tapered socket
and wedge bolts. It can easily be removed using normal maintenance tools.
LUBRICATION SYSTEM: A low-pressure oil pump is provided which
provides lubrication to the main shaft bearings. A dual pressure switch
system monitors the oil pump.
|
|
tumbling media,tumbling compounds, finishing compounds, plastic deburring media, corn cob media ,vibratory compounds
walnut shell media, deburring media, mass finishing, vibratory finishing machines ,deburring machines, ceramic media, tumbling barrels, centrifugal barrel machines
plastic media, plastic polishing media, metal finishing equipment, mechanical finishing, finishing equipment
2009 Grav Co LLC
