Tumbling-Media

Mass Finishing Renders High Quality Parts

Parts that are manufactured usually need removing of jagged edges, cleaning and polishing before they are fit to satisfy their functionality (the function for which they are being built). This is achieved by means of a process called finishing. Mass finishing is several parts being finished all together. It is typically carried out in finishing machines or systems like tumbling machines, vibratory machines, blasters, centrifugal machines etc. Parts are fed into these machines along with finishing media, finishing compounds and water. The parts and the finishing media scrub against each other, with the compounds aiding in removing the debris and keeping it from re-depositing on the parts. Due to this scrubbing action, mass finishing takes place - edges are smoothed, surfaces get polished, nooks get cleaned and parts get broken from runners.

Finishing media are materials that aid in the mass finishing process. There are many types of media like synthetic pre formed plastic media, ceramic media and natural media like corn cob and walnut shell media. Finishing compounds could be dry or wet and depending on the action required, their composition varies. This determines their abrasive action, alkalinity etc. Mass finishing process can take place as a batch process, as a series of steps or as continuous process. In a batch process, parts are loaded as a batch and after finishing, the batch is unloaded. The next batch now goes in and so on. In the step by step process, the parts are taken through a sequence of processes, one by one. After every step, the parts will have some degree of finishing done on them and after the final step, they will be fully ready. In a continuous process, the loading and unloading of parts happens continuously, while the finishing process is carried out.

Walnut shell media are made from treated and crushed walnuts. As they are natural, they are bio degradable and safe for the environment. They are dry finishing media whose grain size is determined by the weight and composition of the parts being finished. They are very good cleaners too apart from being good polishers. They are suited for use with tumble machines and useful in finishing of parts made from soft metals like brass, aluminium and bronze. Mixed with paints, they act as anti skid agents and are typically used in paints used around swimming pools and pathways. Oil well drilling is another area where they are used, to prevent the oil from stagnating.

Walnut shells have the properties of hardness and fibre. They are also naturally angular and multi faceted, which makes the walnut shell media ideal for deburring. They last long and can be reused many times over. Used in tumbling and in some vibrating systems, they help to reduce cycle times. They can be used on delicate surfaces because they do not have a rough abrasive action. So, they do not damage micro finishes. There are companies who have been in the finishing business for a long time; they can find finishing solutions for any needs. To learn more visit http://gravcollc.com/

Vibratory Finishing Machines For The Glossy Finish

Finishing machines are used for the finishing process that is carried out on parts for the purposes of cleaning, deburring, polishing and separation of parts. There are many types of finishing machines. The two important and widely used ones are the tumbling barrel machines and the vibratory finishing machines. In the tumbling variety, a huge barrel holds the parts and finishing media, compounds and water. In the vibratory finishing machines, there are usually tubs or bowls that undergo a shaking action at a particular speed. The shaking action is caused by a shaft that is attached to the tub or bowl.

The vibratory finishing machines come as large floor models (that can be fixed to the floor) or as smaller bench models (that are fixed on tables or benches). When the machine shakes at a high rate of speed, it causes the parts and the media to rub against each other thus resulting in cleaning and polishing. Using the vibrating machines, it is possible to get a very precise cutting of burrs and parts. They are also very effective in removing debris and dirt lodged in nooks and crannies, like a bore for instance. This sort of cleaning is not possible in a tumbling barrel. Vibratory finishing machines are ideally suited for use on delicate and intricate parts; also for large and bulky surfaces like wing spans - because they have high speeds combined with very short strokes. This provides powerful finishing but at the same time places very less stress on the parts. Vibratory finishing machines can be automated or semi automated quite easily and are good for continuous or batch processing.

Finishing or deburring media are materials that provide an abrasive action on parts to aid in the finishing process. They can be natural or man made. They come in different shapes and sizes depending on the requirements. When media is used in finishing machines, they accomplish finishing tasks like cleaning of oils, grease, dirt, grime etc and deburring of jagged edges or removing extra material from parts. Natural deburring media like walnut shells and corn cob media are made from naturally available material – they are non toxic, environment friendly, reusable and cost effective.

Man made deburring media like ceramic media and plastic deburring media are used for heavy and aggressive finishing. They come in different shapes and sizes. Some of the standard shapes found in the deburring media are cones, cylinders, pyramids, three headed stars, triangles etc. These shapes aid in polishing and cleaning hard to reach recesses in the parts. Depending on the shape and size of the holes in the parts, the shape of the media is chosen. If the part has a complex design with many corners having different shapes, then a combination of media shapes can be used to achieve uniform finish in the parts. Companies having a vast experience in the finishing industry generally have the expertise to find tailor made solutions to any deburring requirements. To gather further information, please log on to http://gravcollc.com/

Tumbling Barrels Provide The Needed Finish

Deburring machines are better known as finishing machines. Their purpose is to finish parts – by facilitating polishing, cleaning, separating and deburring actions. There are two important types of mass finishing deburring machines – tumbling barrel machines and the vibratory machines. In all the deburring machines, the parts are loaded along with finishing deburring media, finishing compounds and/ or water. Deburring media include ceramic media and plastic media that are man made and corn cob media and walnut shell media that are natural. Finishing compounds come as wet or dry compounds. Their composition varies depending on the abrasive action that is needed, inhibition action (like anti corrosion, anti rust) and the suspension properties needed. The compounds help to suspend the debris that comes out during the finishing process in deburring machines. This prevents the debris from getting deposited or lodged back into the parts.

Vibratory deburring machines involve a tub or a bowl that is shaken at high speeds which causes the parts and the finishing media to scrape against each other in a filing kind of motion. In a vibratory machine, the sliding action happens on all of the load with a single vibration; there fore cycle times are very less compared to tumbling barrels. They are high speed, short stroke machines and hence are good for delicate parts as well as large surfaces. They are very useful as separators of parts. The loading and unloading of vibratory machines is very simple. There are also other types of deburring machines like centrifugal machines, blasting machines and spinning machines that are used in special cases. In the blasting deburring machines, some media are blasted on to parts to deburr them.

In a tumbling machine, tumbling barrels are present to hold the parts and the finishing media and compounds. They are available as floor (large) and bench (small) models. The parts and the finishing media are lifted from the barrel’s corners by the movement of the machine and they bump and slide against each other. The media that is used in barrel tumbling depends on the roughness of the finishing that is required, the nature of the parts being tumbled and whether polishing or deburring is the prime requirement.

In barrel tumbling, parts can be used without using any media too in special cases. Usually, barrel tumbling is used for wet processing but in some cases where there is a need, dry finishing can also be done using them. Wet barrel finishing is intended for processing metals. They can be used for removing burrs, polishing and improving surface appearance. A dry barrel system gives a finish that is smoother and more uniform than a wet finishing barrel. In factories where there is not much water, dry barrelling is the ideal option. Tumbling barrels are ideal for heavy loads; they function optimally when they are 50 % loaded. Screen doors can be added to barrels for use in separating parts. For more details on the different kinds of deburring machines available from finishing industry experts, go to http://gravcollc.com/

Finishing Parts Becomes Easy With Tumbling Media And Compounds

Tumbling media are materials that are used in the finishing process. They are loaded with parts to be finished into finishing machines, with or without tumbling compounds. They help in cleaning, smoothing and deburring of parts. Tumbling media can be man made or natural. Man made media include plastic media, synthetic media and ceramic media which come in preformed shapes. Natural media include walnut shell media and corn cob media. Tumbling media are used in finishing machines like tumbling barrels, vibratory machines and centrifugal machines.

Plastic media are otherwise known as tumbling stones. They come in shapes like cones, pyramids and triangles and have varying abrasive properties. They create smooth but dull finishes on surfaces and because of their light weight are suited for use on parts that might get damaged easily. They are safe on threaded parts and can be used on parts as a pre cursor to anodizing. The cone shaped plastic media act well on parts with holes and triangle shape acts well on edges and flat surfaces. Multiple shapes can be used on parts with complex designs.

Ceramic tumbling media are made of silica, minerals and abrasives mixed in different proportions and processed at high temperatures to produce hardened shapes. They are good for aggressive finishing needs and work well with hard metal parts. They suit usage with heavy loads that cannot be handled by plastics; they also come in smaller sizes and hence are suited for smaller parts. Synthetic tumbling media also come in different shapes; they weigh lesser compared to ceramic media. They are cost effective and are good to provide ultra smooth finishes. Compared to plastic media, they take more wear and tear and residue left from processing is lesser. They are ideal for use in high energy machines like centrifugal barrels.

Tumbling compounds are chemicals used to increase the effectiveness of media by ensuring that glaze is not formed on the parts during the finishing process. They act as abrasive agents and help in maintaining a nice color to the metal parts. They impart anti rust and anti corrosion properties to the parts when the right agents are added to them; they are effective cleaning agents and help in deburring by suspending debris and preventing them from getting re-deposited on the parts. The compounds are either alkaline or acidic in nature depending on the media they are used with.

The flow rate of the tumbling compounds should be matched with the volume of media being used for a good finish. Tumbling compounds are known to help in degreasing, descaling and removing grime. They help in lubrication of parts to protect them. They help in grinding, polishing and brightening of surfaces. They help to finish delicate parts by providing a cushioning effect and preventing damage to the parts. Acidic tumbling compounds enhance cutting speeds and bleaching efficiency. When used in proper combination with finishing media, tumbling compounds help to reduce cycle times substantially. To learn about the advantages of tumbling media and tumbling compounds, go to http://gravcollc.com/

Tumbling Media And Compounds For That Great Finish

‘Media’ is the terminology used to define a material that is used to modify or alter the appearance of a part. It generally refers to an abrasive, but it could refer to any material that can abrade, clean, polish or separate parts. Tumbling media is used in general purpose metal polishing, deburring – both light and heavy, fast and extra fast and aggressive metal removal, fast, heavy cutting, jewellery polishing, burnishing etc. There are many types of tumbling media like ceramic performed shapes, plastic performed shapes, synthetic performed shapes, precision ceramic preformed shapes, carbon steel, stainless steel, hardwood, aluminium oxide, corn cob, silicon carbide grit and walnut shells are some of them.

A finishing media company has to give high quality products at reasonable prices to their clients. A fully equipped laboratory stocked with finishing machines where new processes are developed to meet even the toughest application will make them effective innovators. Plastic media is normally used for pre painted or pre plated finishes, polishing and in cutting fast and heavy duty. Plastic media are ideal for soft metals like brass and aluminium and stringy materials. It is useful for providing a smooth but dull finish. These media are long lasting and are built to cut fast and provide a fine finish. With a vast experience, a company can provide customized solutions to their clients. Ceramic tumbling media come in different shapes, sizes and composition. Ceramic media are used for fast deburring and tough metal removal. It is mainly used in cutting hard metals. When media of smaller dimensions are needed, ceramic media offers the best options. It is better than plastic media in supporting very heavy metal parts.

Dry finishing media of smaller dimensions are used to polish and finish smaller surfaces like jewellery. For this, cob and walnut shells that are treated are used and a finishing paste is also typically used for this. Very delicate surfaces of any size can also be finished using corn cob media. Corn cob is bio degradable and it is a tumbling grit. It can be applied as tumbling and vibratory media and can dry parts by absorbing oil and dirt, without scratching the parts’ surfaces. These products can be used to finish even very small and delicate surfaces effectively. Their product formulas can achieve 1 Ra finish and are made to handle even finishes of a delicate nature for decorative requirements.

There is a wide range of tumbling compounds to satisfy different client needs. Dry compounds, liquid compounds, burnishing compounds, cleaning compounds and deburring compounds are some of the available finishing tumbling compounds. There are compounds for standard deburring applications, burnishing of steel, part on part and applications in washing different parts. Walnut shells are treated and prepared by grinding them into different grit sizes. They are used in cleaning as well as polishing of surfaces. It is recommended as tumble media for polishing metals like aluminium, brass and bronze. They are soft abrasives but highly durable and angular. To learn more, go to http://gravcollc.com/

Tumbling Barrels For That Great Polish

Finishing is a term to describe the process of burnishing, cleaning, deburring and separation of parts using machines and materials called media to assist in the process. It is an important process to ensure that the parts come out with high quality in terms of a smooth fit and proper functionality apart from becoming aesthetically sound. There are primarily two types of machines used in mass finishing of parts – that is finishing of several parts together. These are tumbling or barrelling machines and vibratory machines.

Tumbling barrels are typically used for rough and tough jobs on hard metals. They are very good for deburring of heavy burrs. They are also recommended for burnishing, radius-ing of jagged edges plus breaking parts from runners. They can unction with or without using finishing media. Tumbling barrels are ideal when the loads are heavy; such loads cannot go on vibratory systems. These barrels run at optimum level when they are half filled. Barrels that have screens can be used as a plastic deflashing machine. Parts can be separated when screen doors are installed in these barrels.

There are wet and dry tumbling barrels. Wet barrel involves batch processing which means the parts are processed as batches. They are used for deburring and polishing, radius-ing, cleaning and improving the surface appearance and smoothness. Processing metals is best done in wet tumbling barrels. This equipment can be used in dry processing too, when needed. Dry barrelling is also a batch processor which is normally used to polish and deburr without liquids. Dry barrels can deflash, grind and form radii too. Compared to a wet system, these produce smoother and more uniform finish. Predominantly, wet tumbling is used in tumbling barrels. But specific cases like lack of readily available water make the dry process a more viable option.

Centrifugal barrel machines are also used in mass finishing of parts. They have gained a lot of popularity because they are the fastest finishing machines available today – about 20 times faster than a vibratory sytem’s cycle times. They are high energy machines in which the parts are placed in closed barrels. Finishing media, water and finishing compounds are added on. The barrels rotate to provide a sliding action inside which gives a uniform finish to the parts. The barrels are made of steel or a composite material and have urethane lining. They can be removed for loading and unloading purposes. Composite barrels can be used where cycle times are expected to be under an hour. For longer durations and larger machine, steel barrels are advisable.

The centrifugal barrel machines come with electronic controls that make them very simple to use. These controls include a process timer that controls the rotation times. There is an emergency stop for crisis situations. Indicator lights help in process tracking. Safety features are there to ensure that these machines cant run without covers and other locks in place. They are also typically wired for different voltage needs. For gaining more insights, http://gravcollc.com/ can be referred.