Parts that are manufactured usually need removing of jagged edges, cleaning and polishing before they are fit to satisfy their functionality (the function for which they are being built). This is achieved by means of a process called finishing. Mass finishing is several parts being finished all together. It is typically carried out in finishing machines or systems like tumbling machines, vibratory machines, blasters, centrifugal machines etc. Parts are fed into these machines along with finishing media, finishing compounds and water. The parts and the finishing media scrub against each other, with the compounds aiding in removing the debris and keeping it from re-depositing on the parts. Due to this scrubbing action, mass finishing takes place - edges are smoothed, surfaces get polished, nooks get cleaned and parts get broken from runners.
Finishing media are materials that aid in the mass finishing process. There are many types of media like synthetic pre formed plastic media, ceramic media and natural media like corn cob and walnut shell media. Finishing compounds could be dry or wet and depending on the action required, their composition varies. This determines their abrasive action, alkalinity etc. Mass finishing process can take place as a batch process, as a series of steps or as continuous process. In a batch process, parts are loaded as a batch and after finishing, the batch is unloaded. The next batch now goes in and so on. In the step by step process, the parts are taken through a sequence of processes, one by one. After every step, the parts will have some degree of finishing done on them and after the final step, they will be fully ready. In a continuous process, the loading and unloading of parts happens continuously, while the finishing process is carried out.
Walnut shell media are made from treated and crushed walnuts. As they are natural, they are bio degradable and safe for the environment. They are dry finishing media whose grain size is determined by the weight and composition of the parts being finished. They are very good cleaners too apart from being good polishers. They are suited for use with tumble machines and useful in finishing of parts made from soft metals like brass, aluminium and bronze. Mixed with paints, they act as anti skid agents and are typically used in paints used around swimming pools and pathways. Oil well drilling is another area where they are used, to prevent the oil from stagnating.
Walnut shells have the properties of hardness and fibre. They are also naturally angular and multi faceted, which makes the walnut shell media ideal for deburring. They last long and can be reused many times over. Used in tumbling and in some vibrating systems, they help to reduce cycle times. They can be used on delicate surfaces because they do not have a rough abrasive action. So, they do not damage micro finishes. There are companies who have been in the finishing business for a long time; they can find finishing solutions for any needs. To learn more visit http://gravcollc.com/
Posted 10 months, 3 weeks ago at 8:44 pm. Add a comment
‘Media’ is the terminology used to define a material that is used to modify or alter the appearance of a part. It generally refers to an abrasive, but it could refer to any material that can abrade, clean, polish or separate parts. Tumbling media is used in general purpose metal polishing, deburring – both light and heavy, fast and extra fast and aggressive metal removal, fast, heavy cutting, jewellery polishing, burnishing etc. There are many types of tumbling media like ceramic performed shapes, plastic performed shapes, synthetic performed shapes, precision ceramic preformed shapes, carbon steel, stainless steel, hardwood, aluminium oxide, corn cob, silicon carbide grit and walnut shells are some of them.
A finishing media company has to give high quality products at reasonable prices to their clients. A fully equipped laboratory stocked with finishing machines where new processes are developed to meet even the toughest application will make them effective innovators. Plastic media is normally used for pre painted or pre plated finishes, polishing and in cutting fast and heavy duty. Plastic media are ideal for soft metals like brass and aluminium and stringy materials. It is useful for providing a smooth but dull finish. These media are long lasting and are built to cut fast and provide a fine finish. With a vast experience, a company can provide customized solutions to their clients. Ceramic tumbling media come in different shapes, sizes and composition. Ceramic media are used for fast deburring and tough metal removal. It is mainly used in cutting hard metals. When media of smaller dimensions are needed, ceramic media offers the best options. It is better than plastic media in supporting very heavy metal parts.
Dry finishing media of smaller dimensions are used to polish and finish smaller surfaces like jewellery. For this, cob and walnut shells that are treated are used and a finishing paste is also typically used for this. Very delicate surfaces of any size can also be finished using corn cob media. Corn cob is bio degradable and it is a tumbling grit. It can be applied as tumbling and vibratory media and can dry parts by absorbing oil and dirt, without scratching the parts’ surfaces. These products can be used to finish even very small and delicate surfaces effectively. Their product formulas can achieve 1 Ra finish and are made to handle even finishes of a delicate nature for decorative requirements.
There is a wide range of tumbling compounds to satisfy different client needs. Dry compounds, liquid compounds, burnishing compounds, cleaning compounds and deburring compounds are some of the available finishing tumbling compounds. There are compounds for standard deburring applications, burnishing of steel, part on part and applications in washing different parts. Walnut shells are treated and prepared by grinding them into different grit sizes. They are used in cleaning as well as polishing of surfaces. It is recommended as tumble media for polishing metals like aluminium, brass and bronze. They are soft abrasives but highly durable and angular. To learn more, go to http://gravcollc.com/
Posted 10 months, 3 weeks ago at 9:12 pm. Add a comment
Finishing media is a term used to describe material or materials that alters the appearance of a part by cutting off rough edges or deburring them. Finishing media is also used in cleaning, burnishing and polishing of parts and their surfaces. Further, they are used in anti rusting and coloring also. There are many types of finishing media like plastic finishing media, ceramic finishing media, Dry finishing media and wet and dry finishing compounds. There are machines like vibratory system, tumblers and spinning systems in which the finishing is carried out – by putting the finishing media and the parts together. The media rubs against the parts, effectively deburring them. The degree of finish can be manipulated by increasing or decreasing the speed of these machines. It can also be controlled by the type, size and shape of the media being used.
Walnut shells come under the category of dry finishing media; they are nothing but treated walnut shells. The shells are grounded to grit of varying dimensions to suit different needs (depending on the nature and weight of the part being finished). The walnut shell media can be used in cleaning and finishing applications. They are ideal for tumble finishing of metals like brass, bronze and aluminium. Walnut shell grit finds use in oil well drilling, to keep the circulation going. It is also mixed with abrasive paints used typically around swimming pools, in walkways etc where they act as anti skid agents.
Walnut shell media is made by crushing the walnut – it is hard and fibrous in nature. They are long lasting, angular and have many faces. They are mildly abrasive. The main advantage of walnut shell media is bio degradability. It is there fore environment friendly and non toxic. It can be reused many times over. It suits both tumbling and vibratory systems and reduces finishing operations time substantially. Because it is only mildly abrasive, it retains micro finishes; while removing the top layer of paints, it protects the base coating of paints.
Deburring can be defined as a finishing method typically used in manufacturing and industrial units. Metals are made into parts of different shapes and sizes by welding, molding or casting etc. The resulting pieces have jagged edges called burrs. The process of removing the burrs is called deburring. It is essential to make high quality parts that are smooth and functional while being aesthetically appealing too. Abrasive materials are normally used as deburring media. The process of deburring is applied in the wood industry, for wood pieces too. Deburring media varies in composition, shape and size depending on the part being deburred. Ceramic deburring media is used for heavy metals, synthetic or plastic media is most suited for less aggressive needs, precision media that come as small pins and spheres are used on surfaces and parts that need precise and delicate handling, natural media like corn cob and walnut shells for non abrasive deburring and finishing compounds for deburring with a good polishing effect. For further details, log on to http://gravcollc.com/
Posted 10 months, 3 weeks ago at 8:25 pm. Add a comment