manufacture of the finest mass finishing equipment and supplies in the marketplace.
Parts that are manufactured usually need removing of jagged edges, cleaning and polishing before they are fit to satisfy their functionality (the function for which they are being built). This is achieved by means of a process called finishing. Mass finishing is several parts being finished all together. It is typically carried out in finishing machines or systems like tumbling machines, vibratory machines, blasters, centrifugal machines etc. Parts are fed into these machines along with finishing media, finishing compounds and water. The parts and the finishing media scrub against each other, with the compounds aiding in removing the debris and keeping it from re-depositing on the parts. Due to this scrubbing action, mass finishing takes place - edges are smoothed, surfaces get polished, nooks get cleaned and parts get broken from runners.
Finishing media are materials that aid in the mass finishing process. There are many types of media like synthetic pre formed plastic media, ceramic media and natural media like corn cob and walnut shell media. Finishing compounds could be dry or wet and depending on the action required, their composition varies. This determines their abrasive action, alkalinity etc. Mass finishing process can take place as a batch process, as a series of steps or as continuous process. In a batch process, parts are loaded as a batch and after finishing, the batch is unloaded. The next batch now goes in and so on. In the step by step process, the parts are taken through a sequence of processes, one by one. After every step, the parts will have some degree of finishing done on them and after the final step, they will be fully ready. In a continuous process, the loading and unloading of parts happens continuously, while the finishing process is carried out.
Walnut shell media are made from treated and crushed walnuts. As they are natural, they are bio degradable and safe for the environment. They are dry finishing media whose grain size is determined by the weight and composition of the parts being finished. They are very good cleaners too apart from being good polishers. They are suited for use with tumble machines and useful in finishing of parts made from soft metals like brass, aluminium and bronze. Mixed with paints, they act as anti skid agents and are typically used in paints used around swimming pools and pathways. Oil well drilling is another area where they are used, to prevent the oil from stagnating.
Walnut shells have the properties of hardness and fibre. They are also naturally angular and multi faceted, which makes the walnut shell media ideal for deburring. They last long and can be reused many times over. Used in tumbling and in some vibrating systems, they help to reduce cycle times. They can be used on delicate surfaces because they do not have a rough abrasive action. So, they do not damage micro finishes. There are companies who have been in the finishing business for a long time; they can find finishing solutions for any needs. To learn more visit http://gravcollc.com/
Posted 2 years, 9 months ago at 8:44 pm. Add a comment
Finishing is a term used to define the process of cleaning, polishing, deburring, coloring, separating and smoothing of parts or components, generally metals. Finishing compounds are compounds used in the process of finishing - they are defined as substances or materials that are used to give surface properties like softness, smoothness, flexibility, resistance to fire, resistance to corrosion, resistance to rusting and so on - to metal parts, wood, textile, leather etc. It is possible to impart a high quality to a finished product with finishing compounds so that the product comes out with the correct functionality, fit and aesthetics.
Mass finishing compounds are used to finish several parts together using machines like tumbling barrels or vibratory systems. The compounds are used to aid in deburring, descaling, polishing of ferrous and non ferrous materials etc. The typical mass finishing process involves putting the parts together with finishing media, water and finishing compounds into a barrel or vibratory machine and allowing them to vibrate or tumble together. As a result, the parts rub against each other or with the finishing media; the rough edges are smoothed out, debris and deposits are cleaned out and specific surface properties are imparted to the parts.
The finishing compounds can be used in closed loop and open loop finishing processes, which involves automatic or manual feeding of finishing media and compounds respectively. There are compounds that are made for wet use and those made for dry use. Compounds are also available for specific use with tumbling systems and those that work well with vibratory systems. There are some special properties given to the finishing compounds when they are manufactured. For example, deburring compounds are made to keep the deburring debris suspended during the finishing process to ensure that there is no re depositing. This way the surfaces are continuously kept ready to accept the abrasive action. Descaling compounds have properties needed to remove scales and assist the finishing media in descaling. Compounds used for polishing are made to provide conditioning to water, detergency, impart rinseability and brightening plus suspension properties to make sure that the debris is kept at bay.
Finishing media are used in the finishing process to clean, polish and deburr. Corn cob media comes under the head of dry finishing media. It is made from treating and powdering of corn cobs to provide abrasive action on parts being finished. As they are made from natural products, corn cob media is bio degradable and environment friendly. It is long lasting and reusable; it is also cost effective. It can be used in both vibratory and tumbling systems. The grit size of the corn cob media is determined by the finishing requirement – it varies depending on whether the finishing process needs to be gentle or rough, the nature of the surface being deburred etc. The corn cob media has very good absorbing properties and can absorb both water and oily substances with ease; proves very effective in degreasing and cleaning parts. To gain further insights into finishing products, log on to http://gravcollc.com/
Posted 2 years, 9 months ago at 8:35 pm. Add a comment
‘Media’ is the terminology used to define a material that is used to modify or alter the appearance of a part. It generally refers to an abrasive, but it could refer to any material that can abrade, clean, polish or separate parts. Tumbling media is used in general purpose metal polishing, deburring – both light and heavy, fast and extra fast and aggressive metal removal, fast, heavy cutting, jewellery polishing, burnishing etc. There are many types of tumbling media like ceramic performed shapes, plastic performed shapes, synthetic performed shapes, precision ceramic preformed shapes, carbon steel, stainless steel, hardwood, aluminium oxide, corn cob, silicon carbide grit and walnut shells are some of them.
A finishing media company has to give high quality products at reasonable prices to their clients. A fully equipped laboratory stocked with finishing machines where new processes are developed to meet even the toughest application will make them effective innovators. Plastic media is normally used for pre painted or pre plated finishes, polishing and in cutting fast and heavy duty. Plastic media are ideal for soft metals like brass and aluminium and stringy materials. It is useful for providing a smooth but dull finish. These media are long lasting and are built to cut fast and provide a fine finish. With a vast experience, a company can provide customized solutions to their clients. Ceramic tumbling media come in different shapes, sizes and composition. Ceramic media are used for fast deburring and tough metal removal. It is mainly used in cutting hard metals. When media of smaller dimensions are needed, ceramic media offers the best options. It is better than plastic media in supporting very heavy metal parts.
Dry finishing media of smaller dimensions are used to polish and finish smaller surfaces like jewellery. For this, cob and walnut shells that are treated are used and a finishing paste is also typically used for this. Very delicate surfaces of any size can also be finished using corn cob media. Corn cob is bio degradable and it is a tumbling grit. It can be applied as tumbling and vibratory media and can dry parts by absorbing oil and dirt, without scratching the parts’ surfaces. These products can be used to finish even very small and delicate surfaces effectively. Their product formulas can achieve 1 Ra finish and are made to handle even finishes of a delicate nature for decorative requirements.
There is a wide range of tumbling compounds to satisfy different client needs. Dry compounds, liquid compounds, burnishing compounds, cleaning compounds and deburring compounds are some of the available finishing tumbling compounds. There are compounds for standard deburring applications, burnishing of steel, part on part and applications in washing different parts. Walnut shells are treated and prepared by grinding them into different grit sizes. They are used in cleaning as well as polishing of surfaces. It is recommended as tumble media for polishing metals like aluminium, brass and bronze. They are soft abrasives but highly durable and angular. To learn more, go to http://gravcollc.com/
Posted 2 years, 9 months ago at 9:12 pm. Add a comment
Finishing media and finishing compounds can be defined as material that are used to remove sharp edges and burrs from parts to make them smooth and provide a good finish and polish effect. There are vibrators, tumblers and spinning machines among others that are used to produce the finish. The finishing media and compounds are used in these machines for varying periods of time to give the desired finish or polish.
Corn cob media come under the dry finishing media type. It is treated corn cob that is powdered to different dimensions depending on the finish requirements. They can be used to achieve very fine finishes in the 1 Ra range and meet any requirements for a decorative finish. Corn cob media is environment friendly as it is made from the hardened cob ring and is organic in nature. It has the advantage of being capable of use as tumbling and vibratory media and can absorb oils, grease and dirt. It can be used to dry parts while keeping their surface safe. Corn cob media also finds use as a burnishing grit for soft metals like brass and bronze. The weight and type of the part to be finished determine the size of the corn grit in the corn cob media.
The corn cob media are re-usable and long lasting as they do not break down easily. They are bio degradable and organic in nature; they can be burned. They are very clean and pose no environmental threats. They can be used effectively on plastics as well as metal surfaces for giving a good finish. They are capable of absorbing water and oils and are effective cleaners. They can be used even on parts with micro finishes as the corn cob media does not harm the surfaces. They are very cost effective too.
Vibratory systems impart a cutting and finishing action by vibrating the processing tub at certain speeds which causes the media or vibratory compounds to scrub against the parts. The scrubbing action in turn removes or cuts sharp edges and provides a smooth finish on the parts. The vibratory compounds can be used in places where precise finishing is required. For instance, to remove excess material embedded in the recesses of a bore, they can be used effectively. They can also be used on large surfaces without worrying about the surface safety as they are gentle even on delicate parts. By controlling the speed of the vibratory system, it can be used on smaller or larger surfaces. BC-300X is one of the wet vibratory compounds and is used for burnishing of parts. It is acidic in nature and can be used on all metals. It is very effective with steel media. It is super effective in cleaning and imparts a corrosion inhibitor for all metals. BC-320 is a wet burnishing compound that works well in vibratory machines. It is specifically for use on aluminium metal and produces a very bright finish. For more information on finishing media, go to http://gravcollc.com/
Posted 2 years, 9 months ago at 8:00 pm. Add a comment