Mass Finishing Renders High Quality Parts
Parts that are manufactured usually need removing of jagged edges, cleaning and polishing before they are fit to satisfy their functionality (the function for which they are being built). This is achieved by means of a process called finishing. Mass finishing is several parts being finished all together. It is typically carried out in finishing machines or systems like tumbling machines, vibratory machines, blasters, centrifugal machines etc. Parts are fed into these machines along with finishing media, finishing compounds and water. The parts and the finishing media scrub against each other, with the compounds aiding in removing the debris and keeping it from re-depositing on the parts. Due to this scrubbing action, mass finishing takes place - edges are smoothed, surfaces get polished, nooks get cleaned and parts get broken from runners.
Finishing media are materials that aid in the mass finishing process. There are many types of media like synthetic pre formed plastic media, ceramic media and natural media like corn cob and walnut shell media. Finishing compounds could be dry or wet and depending on the action required, their composition varies. This determines their abrasive action, alkalinity etc. Mass finishing process can take place as a batch process, as a series of steps or as continuous process. In a batch process, parts are loaded as a batch and after finishing, the batch is unloaded. The next batch now goes in and so on. In the step by step process, the parts are taken through a sequence of processes, one by one. After every step, the parts will have some degree of finishing done on them and after the final step, they will be fully ready. In a continuous process, the loading and unloading of parts happens continuously, while the finishing process is carried out.
Walnut shell media are made from treated and crushed walnuts. As they are natural, they are bio degradable and safe for the environment. They are dry finishing media whose grain size is determined by the weight and composition of the parts being finished. They are very good cleaners too apart from being good polishers. They are suited for use with tumble machines and useful in finishing of parts made from soft metals like brass, aluminium and bronze. Mixed with paints, they act as anti skid agents and are typically used in paints used around swimming pools and pathways. Oil well drilling is another area where they are used, to prevent the oil from stagnating.
Walnut shells have the properties of hardness and fibre. They are also naturally angular and multi faceted, which makes the walnut shell media ideal for deburring. They last long and can be reused many times over. Used in tumbling and in some vibrating systems, they help to reduce cycle times. They can be used on delicate surfaces because they do not have a rough abrasive action. So, they do not damage micro finishes. There are companies who have been in the finishing business for a long time; they can find finishing solutions for any needs. To learn more visit http://gravcollc.com/
Tags: bio degradable, centrifugal machines, Ceramic Media, corn cob, Finishing Compounds, finishing machines, finishing media, Mass Finishing, natural angular, natural media, parts being finished, several parts being finished all together, synthetic pre formed plastic media, treated and crushed walnuts, tumble machines, tumbling machines, vibratory machines, Walnut Shell Media, weight and composition